SAP C-IBP-2105 Test Engine Dumps Training With 82 Questions
C-IBP-2105 Questions Pass on Your First Attempt Dumps for SAP Certified Application Associate Certified
SAP C-IBP-2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
NEW QUESTION 12
Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.
- A. Target key figures for these snapshots are exposed to the user in planning views.
- B. Target key figures for these snapshots must have lag as a root attribute.
- C. Lag-based snapshots are created in the Configuration app for a fixed time range.
- D. Lag-based snapshots are automatically assigned to a snapshot operator.
Answer: B,D
NEW QUESTION 13
How can you check if key figure is editable or non-editable?
- A. Using the Web-based Planning app when selecting key figures
- B. Using the Analytics Advanced app when selecting key figures
- C. Using the Edit View and then the Edit Planning View option
- D. Using the Key Figure Calculations app
Answer: A
NEW QUESTION 14
Which of the following modes can you use when creating a constrained plan? Note: There are 2 correct Answers to this question.
- A. Resource maximization
- B. Profit maximization
- C. Delivery maximization
- D. Production maximization
Answer: B,C
NEW QUESTION 15
Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.
- A. Hiding or displaying totals for the key figure
- B. Setting permitted planning levels
- C. Setting disaggregation logic for the key figure
- D. Enabling fixing for the key figure
- E. Enabling planning notes for the key figure
Answer: C,D,E
NEW QUESTION 16
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?
- A. A time profile has to be activated so that the application job can proceed.
- B. This application job can be run for multiple time profiles at once.
- C. The planning area with this time profile must be activated so that the application job can proceed.
- D. This application job cannot be scheduled for immediate start.
Answer: C
NEW QUESTION 17
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Caption, as defined in configuration for the default name
- B. Full unique name including the dimension and technical name
- C. Business meaning, as defined in configuration
- D. Changed member names that the user had created
Answer: B,C
NEW QUESTION 18
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.
- A. Run a scenario-specific demand sensing job.
- B. Run a scenario-specific inventory optimization job.
- C. Share data with other users.
- D. Change scenario-specific master data.
- E. Display data in analytics.
Answer: B,C,E
NEW QUESTION 19
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.
- A. SOURCELOCATION
- B. SOURCECUSTOMER
- C. SOURCEPRODUCTION
- D. LOCATIONFR
Answer: A,B
NEW QUESTION 20
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Data input review for inventory
- B. Demand review
- C. Demand sensing stage
- D. Demand-supply balancing
Answer: B,D
NEW QUESTION 21
Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.
- A. Each step depicted in the template can have tasks associated with it.
- B. All process templates are assigned to dashboards.
- C. New instances of templates allow for re-use of the same processes again.
- D. The number of steps in a process template is the same for all implementations.
Answer: A,C
NEW QUESTION 22
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.
- A. Target inventory violation cost should be greater than discount for demand lateness.
- B. Target inventory violation cost should be greater than inventory holding cost rate.
- C. Target inventory violation cost should be less than max inventory violation cost.
- D. Target inventory violation cost should be less than transportation cost rate.
Answer: B,D
NEW QUESTION 23
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Link two analytics charts.
- B. Organize charts.
- C. Add process templates.
- D. Display all assigned analytics on a single UI.
- E. Rename the charts.
Answer: B,C,D
NEW QUESTION 24
How can you make charts and dashboards private?
- A. Enable the relevant settings in the global configuration parameters.
- B. Choose only relevant key figures and filters in the Analytics Advanced application.
- C. Set restrictions for charts in the Permission filter application.
- D. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.
Answer: A
NEW QUESTION 25
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.
- A. Splitting the values from aggregated to detailed level based on stored split-factor key figure
- B. Splitting the values from aggregated to detailed level using multiplication by the proportions
- C. Splitting the values from detailed to aggregated level by using copy operator
- D. Splitting the values from aggregated to detailed level based on time profile attribute
Answer: A,B
NEW QUESTION 26
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.
- A. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- B. Supply chain graph in Supply Chain Network app
- C. Jobs in the Applications Jobs app
- D. Planning view templates in the SAP IBP add-in for Microsoft Excel
Answer: C,D
NEW QUESTION 27
Which of the following is one of the functions of multi-echelon inventory optimization?
- A. Ability to optimize lead times between different locations
- B. Ability to optimize delivery costs between different locations
- C. Ability to maintain high external service levels with low internal service levels
- D. Ability to maintain high external service levels with high internal service levels
Answer: C
NEW QUESTION 28
When can filter blocks appear in calculations? Note: There are 2 correct Answers to this question.
- A. When modeling attribute as a key figure
- B. When modeling cross-period calculations
- C. When using IFISNULL statements in the formula
- D. When modeling attribute transformations
Answer: B,D
NEW QUESTION 29
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by a start and end date and profiles by an integer.
- B. Both periods and profiles are identified by an integer.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Periods are identified by an alphanumeric prefix and profiles by an integer.
Answer: A
NEW QUESTION 30
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?
- A. Production source validity at the start of seasonal peak
- B. Incremental production values
- C. Capacity expansion with additional costs
- D. Adjusted production interactive values
Answer: C
NEW QUESTION 31
Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct Answers to this question.
- A. The total number of attributes that can use subtotals in the planning view can be restricted.
- B. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
- C. Only attribute-based totals can be added to the planning view.
- D. The total value can be added before or after the selected attribute.
Answer: A,D
NEW QUESTION 32
What are S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments. Additional tiering costs (default). Target inventory violation cost
- B. Number of fair share segments. Maximum days of coverage. Number of fair share segments late delivery
- C. Number of fair share segments. Additional tiering costs (default). Number of fair share segments late delivery
- D. Number of fair share segments. Maximum inventory. Additional tiering costs (default)
Answer: C
NEW QUESTION 33
You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct Answers to this question.
- A. Number of local members and complexity of calculations
- B. Complex calculation graphs for key figures
- C. Excessive IBP formatting in Excel UI
- D. Number of analytics charts displaying key figures' values
Answer: B,C
NEW QUESTION 34
......
C-IBP-2105 Practice Test Pdf Exam Material: https://exam-labs.prep4sureguide.com/C-IBP-2105-prep4sure-exam-guide.html